🟠

B0014 on CHEVROLET IMPALA

Q: "What does B0014 mean on a Chevrolet Impala?"

"It points to air bag deployment circuit or seat wiring fault. FixIt found 1 NHTSA reports for this exact code/vehicle pair, so confirm with an enhanced scan and the OEM service procedure."

Q: "What are common symptoms of B0014 on Chevrolet Impala?"

"Service Air Bag message or SRS warning light; Airbag module stores B0014 with other deployment-loop codes; Warning changes when seat position or under-seat wiring moves."

Q: "What should I do first for B0014?"

"Do not probe SRS circuits casually; follow the service manual and disable power first. Then inspect wiring/connectors, verify voltage/ground, and check VIN-specific recalls or campaigns where applicable."

Air bag deployment circuit or seat wiring fault

NHTSA Reports

Severity

High

Most Affected

2009

Crashes / Fires

0 / 0

Source: NHTSA Complaints Database · SAE J2012

Last reviewed: Jun 3, 2026 Last updated: Jun 3, 2026

Methodology: We combine code standards with complaint and reliability patterns, then review for clear, vehicle-first diagnosis steps.

Sources: SAE/OBD-II definitions, manufacturer service information, and public reliability reports (including NHTSA where applicable).

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

What B0014 Means on Your CHEVROLET IMPALA

B0014 on Chevrolet Impala points to air bag deployment circuit or seat wiring fault. FixIt matched 1 NHTSA owner reports for this exact code/vehicle pair, so use this page to prioritize the most likely symptoms, components, and next checks before replacing parts.

1 Chevrolet Impala owners have reported this code/reference in NHTSA complaints across 2009-2009. GM owner reports most often mention service-airbag warnings and wiring/sensor faults under the seat.

Real CHEVROLET IMPALA Owner Reports

Source: NHTSA Complaints Database

"SERVICE AIR BAG LIGHT HAS COME ON MULTIPLE TIMES. TAKEN INTO DEALER EACH TIME, WHICH FOUND THE FOLLOWING CODES, B001A, B0014, B0020. DEALER FOUND AND REPAIRED THE FOLLOWING, CPA CONNECTOR TO NOT BE PROPERLY INSTALLED - R&R CONNECTOR AND INSTALLED PROPERLY, CPA CONNECTOR UNDER SEAT TO BE OUT OF PLACE - R&R CONNECTOR AND"

— 2009 CHEVROLET IMPALA owner · AIR BAGS · Filed 05/19/2011

All reports filed by vehicle owners directly with the U.S. Department of Transportation.

📊 Complaint Trend by Model Year

'09

Common Causes on CHEVROLET IMPALA

Based on NHTSA complaint component analysis for this vehicle.

AIR BAGS 100%

What To Do Next

1
Check for recalls on YOUR VIN
Go to nhtsa.gov/recalls and enter your VIN. If your vehicle is covered, repairs are free.
2
Get a proper diagnosis
A code alone doesn't tell you the exact failed part. A diagnostic at a shop ($50–$150) pinpoints the root cause before you spend money on parts.
3
Compare repair quotes
Get 2–3 quotes. Dealer vs. independent shop prices often differ 30–50% for the same repair.

Frequently Asked Questions

What does B0014 mean on a Chevrolet Impala? ▾

It points to air bag deployment circuit or seat wiring fault. FixIt found 1 NHTSA reports for this exact code/vehicle pair, so confirm with an enhanced scan and the OEM service procedure.

What are common symptoms of B0014 on Chevrolet Impala? ▾

Service Air Bag message or SRS warning light; Airbag module stores B0014 with other deployment-loop codes; Warning changes when seat position or under-seat wiring moves.

What should I do first for B0014? ▾

Do not probe SRS circuits casually; follow the service manual and disable power first. Then inspect wiring/connectors, verify voltage/ground, and check VIN-specific recalls or campaigns where applicable.