🟠

B0014 on CHEVROLET TRAVERSE

Q: "What does B0014 mean on a Chevrolet Traverse?"

"It points to air bag deployment circuit or seat wiring fault. FixIt found 2 NHTSA reports for this exact code/vehicle pair, so confirm with an enhanced scan and the OEM service procedure."

Q: "What are common symptoms of B0014 on Chevrolet Traverse?"

"Service Air Bag message or SRS warning light; Airbag module stores B0014 with other deployment-loop codes; Warning changes when seat position or under-seat wiring moves."

Q: "What should I do first for B0014?"

"Do not probe SRS circuits casually; follow the service manual and disable power first. Then inspect wiring/connectors, verify voltage/ground, and check VIN-specific recalls or campaigns where applicable."

Air bag deployment circuit or seat wiring fault

NHTSA Reports

Severity

High

Most Affected

2014, 2015

Crashes / Fires

0 / 0

Source: NHTSA Complaints Database · SAE J2012

Last reviewed: Jun 3, 2026 Last updated: Jun 3, 2026

Methodology: We combine code standards with complaint and reliability patterns, then review for clear, vehicle-first diagnosis steps.

Sources: SAE/OBD-II definitions, manufacturer service information, and public reliability reports (including NHTSA where applicable).

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

What B0014 Means on Your CHEVROLET TRAVERSE

B0014 on Chevrolet Traverse points to air bag deployment circuit or seat wiring fault. FixIt matched 2 NHTSA owner reports for this exact code/vehicle pair, so use this page to prioritize the most likely symptoms, components, and next checks before replacing parts.

2 Chevrolet Traverse owners have reported this code/reference in NHTSA complaints across 2014-2015. GM owner reports most often mention service-airbag warnings and wiring/sensor faults under the seat.

Real CHEVROLET TRAVERSE Owner Reports

Source: NHTSA Complaints Database

"MADE AN APPT. WITH A CHEVROLET DEALERSHIP WITH A SERVICE AIRBAG RED LIGHT ON THE DASH BOARD ON 6/28/2019. APPOINTMENT WAS CONFIRMED AND ONCE THERE, I WAS TOLD TO RETURN THE VEHICLE ON ANOTHER DAY, NO APPT. AVAILABLE. TO MY SURPRISE, THE DEALERSHIP ADVISED ME TO CONTINUE TO DRIVE MY CAR. I DID RETURN ON 7/2/2019 DIAG. $"

— 2014 CHEVROLET TRAVERSE owner · AIR BAGS · Filed 07/02/2019

"DASHBOARD DISPLAYS "SERVICE AIRBAG" RANDOMLY AND INTERMITTENTLY. I LOOKED UP SPECIAL COVERAGE 15804 AND BROUGHT VEHICLE TO DEALERSHIP WHERE I PURCHASED. MY VIN DOESN'T HAVE THE SPECIAL COVERAGE BUT THE DIAGNOSTICS ARE THE SAME AS DESCRIBED. DEALERSHIP AGREED TO OBTAIN DIC CODE WHICH IS B0014. THIS CODE IS INCLUDED IN S"

— 2015 CHEVROLET TRAVERSE owner · AIR BAGS · Filed 12/15/2017

All reports filed by vehicle owners directly with the U.S. Department of Transportation.

📊 Complaint Trend by Model Year

'14

'15

Common Causes on CHEVROLET TRAVERSE

Based on NHTSA complaint component analysis for this vehicle.

AIR BAGS 100%

What To Do Next

1
Check for recalls on YOUR VIN
Go to nhtsa.gov/recalls and enter your VIN. If your vehicle is covered, repairs are free.
2
Get a proper diagnosis
A code alone doesn't tell you the exact failed part. A diagnostic at a shop ($50–$150) pinpoints the root cause before you spend money on parts.
3
Compare repair quotes
Get 2–3 quotes. Dealer vs. independent shop prices often differ 30–50% for the same repair.

Frequently Asked Questions

What does B0014 mean on a Chevrolet Traverse? ▾

It points to air bag deployment circuit or seat wiring fault. FixIt found 2 NHTSA reports for this exact code/vehicle pair, so confirm with an enhanced scan and the OEM service procedure.

What are common symptoms of B0014 on Chevrolet Traverse? ▾

Service Air Bag message or SRS warning light; Airbag module stores B0014 with other deployment-loop codes; Warning changes when seat position or under-seat wiring moves.

What should I do first for B0014? ▾

Do not probe SRS circuits casually; follow the service manual and disable power first. Then inspect wiring/connectors, verify voltage/ground, and check VIN-specific recalls or campaigns where applicable.