P0708: Transmission Range Sensor A Circuit High
What Does P0708 Mean?
P0708 is a diagnostic trouble code indicating: Transmission Range Sensor A Circuit High. This code relates to the transmission system. It has been reported in NHTSA complaints across 1 different vehicle models.
The automatic transmission is controlled by the TCM using input from speed sensors, temperature sensors, and pressure sensors. When the TCM detects a fault, it may activate limp mode (2nd or 3rd gear only). Shift solenoids are electromagnetic valves inside the valve body controlling hydraulic fluid flow. Modern transmissions use 4-8 solenoids in combination for each gear. Solenoid failures are often caused by contaminated fluid — worn clutch material and degraded fluid create varnish that sticks solenoids. Always check transmission fluid first: level, color (red/pink good, brown/black bad), and smell (burnt = internal damage). Transmission DTCs escalate fast — a $200 solenoid fix can become a $3000-$5000 rebuild if ignored.
Symptoms of P0708
- ⚠️ Check engine/transmission warning light on
- ⚠️ Harsh, delayed, or erratic shifting
- ⚠️ Transmission stuck in one gear (limp mode)
- ⚠️ No upshift or no downshift
- ⚠️ Transmission slipping
- ⚠️ RPM flares between shifts
Common Causes
- 🔍 Faulty shift solenoid
- 🔍 Contaminated transmission fluid
- 🔍 Wiring issue between TCM and solenoid
- 🔍 Valve body wear
- 🔍 TCM internal failure
Real Owner Reports
From NHTSA complaint database — actual owner descriptions.
"THE TURN SIGNAL STAYED ON, EVERYTHING ELECTRIC SHUT OFF, THEN WHEN I PUT THE CAR IN PARK AND TOOK OUT MY KEY, THE CAR WAS STILL RUNNING!! THIS HAPPENED TWICE AND NO ONE CAN FIGURE OUT WHAT COULD POSSIBLY BE WRONG. THEN MY CHECK ENGINE LIGHT WENT ON. THE DIAGNOSTIC TEST READ P0708. I WAS TOLD I CAN"
— Dodge Caliber owner, 05/23/2011
Source: NHTSA Complaints Database
Most Reported Vehicles for P0708
Based on NHTSA owner complaint data.
| # | Vehicle | Reports |
|---|---|---|
| 1 | DODGE CALIBER |
Diagnostic Tips
- Check fluid level and condition FIRST
- Multiple codes suggest valve body or internal damage
- Monitor solenoid duty cycle with scan tool
- Solenoids often accessible by removing pan
Common Mistakes to Avoid
- ❌ Replacing solenoid without flushing contaminated fluid
- ❌ Using aftermarket fluid instead of manufacturer-specified
- ❌ Driving in limp mode for extended periods
Frequently Asked Questions
What is a shift solenoid?
Can I drive in limp mode?
How much for solenoid replacement?
Can fluid change fix it?
What To Do Next
Possible Fixes
- 🔧 Replace shift solenoid or pack
- 🔧 Transmission fluid flush with manufacturer fluid
- 🔧 Repair wiring to transmission
- 🔧 Replace valve body
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.