P1403: Differential Pressure Feedback Electronic Sensor Hoses Reversed

FORD LINCOLN MERCURY BMW BUICK CADILLAC CHEVY CHRYSLER

Severity

Medium

System

Manufacturer-Specific Powertrain

Last reviewed: Jan 1, 0001 Last updated: Jan 1, 0001

Methodology: We combine code standards with complaint and reliability patterns, then review for clear, vehicle-first diagnosis steps.

Sources: SAE/OBD-II definitions, manufacturer service information, and public reliability reports (including NHTSA where applicable).

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

What Does P1403 Mean?

P1403 is a manufacturer-specific diagnostic trouble code: Differential Pressure Feedback Electronic Sensor Hoses Reversed. This code applies to FORD, LINCOLN, MERCURY, BMW, BUICK vehicles. Unlike generic OBD-II codes, manufacturer-specific codes are defined by the vehicle maker and may only apply to certain makes and models.

Symptoms of P1403

⚠️ Check Engine Light (MIL) illuminated
⚠️ Differential Pressure Feedback Electronic Sensor Hoses Reversed not functioning as expected
⚠️ Related system may be in fail-safe mode
⚠️ Reduced engine performance

Common Causes

🔍 Faulty Differential Pressure Feedback Electronic Sensor Hoses Reversed
🔍 Wiring or connector issue in Differential Pressure Feedback Electronic Sensor Hoses Reversed circuit
🔍 Related mechanical or electrical fault
🔍 ECM/PCM issue (rare)

Frequently Asked Questions

What does P1403 mean?

P1403 indicates: Differential Pressure Feedback Electronic Sensor Hoses Reversed. The vehicle's computer has detected that the Differential Pressure Feedback Electronic Sensor Hoses Reversed is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P1403?

You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P1403 for extended periods may cause additional problems.

How much does it cost to fix P1403?

Repair costs for P1403 typically range from $80 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Inspect Differential Pressure Feedback Electronic Sensor Hoses Reversed and related wiring
🔧 Replace faulty Differential Pressure Feedback Electronic Sensor Hoses Reversed

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.