P2006 on DODGE CALIBER — Intake Manifold Runner Control Stuck Closed Bank 1

Q: "What does P2006 mean on a DODGE CALIBER?"

"P2006 indicates: Intake Manifold Runner Control Stuck Closed Bank 1. This is a powertrain code. 2 DODGE CALIBER owners have reported this to NHTSA."

Q: "What are the most common causes of P2006 on DODGE CALIBER?"

"Based on 2 NHTSA reports, the most commonly cited components are: Power Train,Unknown Or Other, Vehicle Speed Control,Unknown Or Other. These percentages are based on the component field in owner complaints."

Q: "Is P2006 serious on my DODGE CALIBER?"

"Of 2 NHTSA reports for this code on DODGE CALIBER, none involved a crash or fire. However, any diagnostic code should be evaluated by a qualified mechanic."

Q: "What should I do if my DODGE CALIBER shows P2006?"

"1) Check for recalls on your VIN at nhtsa.gov/recalls. 2) Get a professional diagnosis — a code alone doesn't identify the exact failed part. 3) Get 2-3 repair estimates to compare."

What P2006 Means on Your DODGE CALIBER

P2006 is a diagnostic trouble code indicating: Intake Manifold Runner Control Stuck Closed Bank 1. This code relates to the powertrain system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

2 DODGE CALIBER owners have reported this issue to NHTSA across model years 2007. Most reports come from the 2007 model year. The most commonly reported component is Power Train,Unknown Or Other (50.0% of reports).

Real DODGE CALIBER Owner Reports

Source: NHTSA Complaints Database

"My service engine light came on, took it to advance auto and it popped codes p2006, p1607, p0722, p0717. i changed all codes except p1607 because they were cheaper. the pcm runs 299.00 or more and i cannot afford that. my vehicle barely made it home, it had very little power."

— 2007 DODGE CALIBER owner · POWER TRAIN,UNKNOWN OR OTHER · Filed 03/18/2016

"I was traveling on i-40 when i hit a bump in the road, my engine light came on and stayed on from memphis, tn to jamestown, tn. i was not having any driving problems, the car drove fine. i took it in to advance auto and had them run the obd2 on it. it pulled 4 codes and they are as follows..."

— 2007 DODGE CALIBER owner · VEHICLE SPEED CONTROL,UNKNOWN OR OTHER · Filed 06/12/2015

All reports filed by vehicle owners directly with the U.S. Department of Transportation.

📊 Complaint Trend by Model Year

2

'07

Common Causes on DODGE CALIBER

Based on NHTSA complaint component analysis for this vehicle.

POWER TRAIN,UNKNOWN or OTHER 50%

VEHICLE SPEED CONTROL,UNKNOWN or OTHER 50%

What To Do Next

1
Check for recalls on YOUR VIN
Go to nhtsa.gov/recalls and enter your VIN. If your vehicle is covered, repairs are free.
2
Get a proper diagnosis
A code alone doesn't tell you the exact failed part. A diagnostic at a shop ($50–$150) pinpoints the root cause before you spend money on parts.
3
Compare repair quotes
Get 2–3 quotes. Dealer vs. independent shop prices often differ 30–50% for the same repair.

Frequently Asked Questions

What does P2006 mean on a DODGE CALIBER? ▾

P2006 indicates: Intake Manifold Runner Control Stuck Closed Bank 1. This is a powertrain code. 2 DODGE CALIBER owners have reported this to NHTSA.

What are the most common causes of P2006 on DODGE CALIBER? ▾

Based on 2 NHTSA reports, the most commonly cited components are: Power Train,Unknown Or Other, Vehicle Speed Control,Unknown Or Other. These percentages are based on the component field in owner complaints.

Is P2006 serious on my DODGE CALIBER? ▾

Of 2 NHTSA reports for this code on DODGE CALIBER, none involved a crash or fire. However, any diagnostic code should be evaluated by a qualified mechanic.

What should I do if my DODGE CALIBER shows P2006? ▾

1) Check for recalls on your VIN at nhtsa.gov/recalls. 2) Get a professional diagnosis — a code alone doesn't identify the exact failed part. 3) Get 2-3 repair estimates to compare.

P2006 on Other Vehicles

→ All codes reported on DODGE CALIBER