P2619 — Crankshaft Position Signal Output Circuit High

What Does P2619 Mean?

P2619 is a diagnostic trouble code indicating: Crankshaft Position Signal Output Circuit High. This code relates to the powertrain system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

Symptoms of P2619

⚠️ Check Engine Light (MIL) illuminated
⚠️ Crankshaft Position Signal Output reading stuck at maximum value
⚠️ Related system operating erratically or in default mode
⚠️ Reduced engine performance

Common Causes

🔍 Short to voltage in Crankshaft Position Signal Output wiring harness
🔍 Corroded or water-damaged Crankshaft Position Signal Output connector
🔍 Faulty Crankshaft Position Signal Output outputting maximum voltage
🔍 Damaged wiring rubbing against metal components
🔍 ECM/PCM internal fault (rare)

Frequently Asked Questions

What does P2619 mean?

P2619 indicates: Crankshaft Position Signal Output Circuit High. The vehicle's computer has detected that the Crankshaft Position Signal Output is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P2619?

You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P2619 for extended periods may cause additional problems.

How much does it cost to fix P2619?

Repair costs for P2619 typically range from $20 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Inspect and repair Crankshaft Position Signal Output wiring for short to voltage
🔧 Clean or replace corroded Crankshaft Position Signal Output connector
🔧 Replace faulty Crankshaft Position Signal Output

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P2619: Crankshaft Position Signal Output Circuit High